火焰切割加工和手动加工的区别

除毛刺外,火焰切割加工还会在工件的底部形成熔渣和氧化层。这些顽固份子可以被去毛刺机中的锤销除渣处理掉。阿库EdgeBreaker®去毛刺机可强有力去除大毛刺及熔渣,锤销从下方敲击工件,直到可靠去除熔渣。

与手动加工相比,优势在于:无需翻转沉重的工件,操作人员只要将切割后的工件直接送入设备就可以进行去熔渣加工。这不仅减少了劳动压力和潜在风险,而且还简化了整个加工流程。借助去毛刺设备,除渣的速度和可靠性大大优于手工作业,加工全面,保障去毛刺加工全过程的工艺安全。


相关推荐
新闻聚焦
猜你喜欢
热门推荐
  • Detection of common thread

      Detection of common thread:For the general standard thread, the thread ring gauge or plug gauge is used to measure. In the measurement of external thread, if the thread "over the end" ring is good screw, and the "stop end" ring gauge is not screw into, it indicates that the proce......

    2023-01-01    来源:本站

    分享
  • Fault analysis and handling of electronic expansion valve body

      Fault analysis and treatment of electronic expansion valve body:After confirming that the resistance and joint of the coil part are normal, switch on the power supply of the unit to run, and hold the valve body part by hand to feel whether the valve body is moving. The time from fully open to fully......

    2023-01-01    来源:本站

    分享
  • Analysis and treatment of nozzle failure of electronic expansion valve

      Electronic expansion valve nozzle failure analysis and treatment:1. Apply soapy water to all welding parts and nut connection parts of the pipeline to see if there are bubbles. If there are leaks, reweld or adjust.2. Before the pipeline is rewelded, the valve body should be protected according to th......

    2023-01-01    来源:本站

    分享
  • Failure analysis and treatment of electronic throttle element of electronic expansion valve

      Failure analysis and treatment of electronic throttle element of electronic expansion valve:Open the shell of the electronic throttle element, switch on the power supply of the device, and hold the coil of the electronicexpansion valveby hand to check whether there is any action and whet......

    2023-01-01    来源:本站

    分享
返回列表
Ctrl+D 将本页面保存为书签,全面了解最新资讯,方便快捷。